The clock spring allows for the continuous transmission of signals to and from the steering wheel controls, such as the airbag system, horn, and other functions that may be integrated into the steering wheel.

Here is the information about the clock spring:

OEM Number: 93490C1210 or 93490-C1210

Application: This clock spring is specifically designed for use in certain Hyundai models, including the Hyundai Sonata and Hyundai ix25 within the years 2015 to 2017.

Some details about the clock spring:

Installation: Replacing a clock spring usually requires disassembly of the steering wheel or dashboard to access the component. Due to the complexity of the task and the importance of the component to vehicle safety, it should be installed by a professional technician.

Safety: Since the clock spring is directly related to the vehicle's safety systems, it is critical to use a genuine OEM part to ensure the system's integrity and functionality.

As the clock spring you have is brand new and unopened, it is ready for installation. However, because of the sensitive nature of the airbag system and the need for precise installation, it is strongly recommended that you have this part installed by a qualified mechanic. This will help ensure that the airbag system and other steering wheel controls work correctly and safely. Always follow the vehicle manufacturer's recommendations and safety procedures when dealing with vehicle repairs, especially those involving the airbag system.

Product description:

This is Auto Steering Wheel Clock Spring OEM#93490C1210 93490-C1210 Brand New Unopened

Clock Spring Sensor for Hyundai Sonata ix25 and more models.

Trade Name

Clock Spring

OEM Number

93490C1210 93490-C1210

Applicable models

Hyundai Sonata ix25 2015-2017

2015 Hyundai Sonata

2015-2017 Hyundai Creta ix25

Installation precautions:
① Confirm that the front wheels are in a straight state;
② Ensure that the connector on the clock spring rotor is in the 6 o'clock or 12 o'clock position, the neutral pin is locked, the ↓↑ mark is aligned, and a single white flat cable can be seen from the neutral window.
③ The three pins of the clock spring and the combination switch need to be installed and tightened in place. After assembly, they should not be loose or easily come off
④ Fix the clock spring pigtail connector buckle in the buckle hole of the pipe column bracket to ensure it is securely fastened; The clock spring pigtail wire connector is firmly connected to the wire harness connector, and a "click" sound is heard. Pull the connector to check and ensure it is securely inserted
⑤ When assembling the steering wheel, disconnect the neutral pin according to Figure 14 (S6-5828100 (A) is for pulling out the neutral pin), and during the assembly process, the clock spring does not rotate significantly
⑥ After assembling the steering wheel, firmly connect the small wire of the steering wheel to the clock spring connector. If you hear a "click" sound, pull the connector to check and ensure it is securely inserted
⑦ Connect the DAB small wire connector to the DAB and press the yellow locking buckle to lock it in place

Inquiry Cart 0

Black Car Clock Spring Contact Assy 93490C1210 For Hyundai Sonata Ix25 2015-2017

Auto Clock Spring

Auto Timing Chain and Accessories

Auto Wheel Hubs and Accessories

Auto Drive Shafts and Accessories

Auto Alternator and Accessories

Auto Blower Fans and Accessories

Auto Fuel Pump and Parts

Auto Transmission Series Accessories

Auto Cooling System and Accessories

Auto Control Arm

Auto Ignition Coils

Auto Belt and Pulley

Air Conditioning Systems

Auto Spark Plugs

Other Engine Parts

Auto Engine Valve Cover

Auto Engine Mounts

Auto Sensors

Auto Oil Filters

Auto Shock Absorbers and Accessories

Auto Headlights and Taillight

Auto Steering Systems

Auto Body Systems

Window Regulator Motor

Black Car Clock Spring Contact Assy 93490C1210 For Hyundai Sonata Ix25 2015-2017